USAGE: Plastic, Wood & Aluminum
Shopping Cart
Your Cart is Empty
Quantity:
Subtotal
Taxes
Shipping
Total
These tools are designed to trim excess material away. It is a two edge tool with straight cutting edges. These tools also have a ball bearing on the tip to assist in following patterns. These are not recommended for computerized routing systems.
Bosch 85200 series - 2 Edge with Ball Bearing Pilot on Tip - Solid Carbide
Part Number | Cutting Dia | Cutiing Lgth | Shank Dia | OAL |
|---|---|---|---|---|
85268M | 3/8 | 1 | 1/4 | 2 1/2 |
85266M | 1/2 | 1 | 1/4 | 2 3/8 |
85207M | 1/2 | 1 | 1/2 | 2 5/8 |
92-000 series - 2 Edge with Ball Bearing Pilot on Tip - Solid Carbide
Part Number | Cutting Dia | Cutiing Lgth | Shank Dia | OAL |
|---|---|---|---|---|
92-900 | 1/4 | 3/4 | 1/4 | 2 1/4 |
28-55 | 1/4 | 1 | 1/4 | 2 1/2 |
92-100 | 1/4 | 1 1/4 | 1/4 | 2 3/4 |
Bosch 85200M series - 3 Edge with Ball Bearing Pilot on Tip - Carbide Tipped
Part Number | Cutting Dia | Cutiing Lgth | Shank Dia | OAL |
|---|---|---|---|---|
85216M | 1/2 | 1 | 1/4 | 2 1/2 |
85602M | 1/2 | 1 1/2 | 1/2 | 4 1/2 |
Bosch 85200M series - 2 Edge with Ball Bearing on Shank - Carbide Tipped
Part Number | Cutting Dia | Cutiing Lgth | Shank Dia | OAL |
|---|---|---|---|---|
85680M | 1/2 | 1 | 1/4 | 2 1/2 |
Onsrud 27-00 series - 1 Edge with 1/4" Self Pilot (No Ball Bearing) - Solid Carbide
Part Number | Cutting Dia | Cutiing Lgth | Shank Dia | OAL |
|---|---|---|---|---|
27-00 | 1/4 | 1/4 | 1/4 | 1 1/2 |