Long Lengths

USAGE: Foam & Natural Wood

Long bits are great because they let you rout thick material but maintain small radiuses. However, long bits are much more fragile and can magnify imperfections in your machine. Avoid using bits that are significantly longer than needed. Additionally, use only one pass when routing foam. The bits can handle one pass in foam and engaging the entire cutting edge supports the tool.

1 Edge Upcut Spiral - Solid Carbide

Part Number	Cutting Dia	Cutting Lgth	Shank Dia	OAL
13635B*	1/4	2 1/4	1/4	3 3/4
13952A*	3/8	3 3/16	3/8	5

2 Edge Upcut Spiral - Solid Carbide

Part Number	Cutting Dia	Cutting Lgth	Shank Dia	OAL
52-554*	1/8	1 1/16	1/4	2 1/2
92-140*	1/8	1 1/16	1/8	3
52-558	3/16	1 1/8	3/16	2 1/2
52-160h	3/16	1 1/8	1/4	2 1/2
52-560*	3/16	1 5/8	3/16	3
92-262*	3/16	1 5/8	3/16	3 1/2
52-180h	1/4	1 1/4	1/4	2 1/2
52-181h	1/4	1 3/8	1/4	3
52-281h*	1/4	1 3/4	1/4	3 1/2
52-564*	1/4	2 1/4	1/4	4
92-564*	1/4	3	1/4	6
92-570*	5/16	3	5/16	6
52-570*	5/16	3 1/8	5/16	4 1/2
52-574*	3/8	3 1/2	3/8	5
92-574*	3/8	4	3/8	7

4 Edge Upcut Spiral - Solid Carbide

Part Number	Cutting Dia	Cutting Lgth	Shank Dia	OAL
92-141*	1/8	1 1/16	1/8	3
92-184	1/4	1 1/4	1/4	2 1/2
92-484	1/2	3	1/2	6

2 Edge Straight - Solid Carbide

Part Number	Cutting Dia	Cutting Lgth	Shank Dia	OAL
56-281h*	1/4	1 5/8	1/4	3
56-282h*	1/4	2 1/4	1/4	3 1/2

2 Edge Upcut Spiral - High Speed Steel

Part Number	Cutting Dia	Cutting Lgth	Shank Dia	OAL
40-201h*	1/8	1 1/16	1/4	2 1/2
12-37	1/4	1 1/4	1/4	3 1/2
40-282h*	1/4	2 1/8	1/4	3 1/4
40-212h*	5/16	3 1/8	5/16	5 1/4

4 Edge Upcut Spiral - High Speed Steel

Part Number	Cutting Dia	Cutting Lgth	Shank Dia	OAL
92-384	3/8	2 5/8	3/8	4 1/4
40-564*	1/2	4 1/8	1/2	6 1/2
92-414	1/2	3	1/2	5

2 Edge Straight - Carbide Tipped

Part Number	Cutting Dia	Cutting Lgth	Shank Dia	OAL
48-206h	1/4	1 1/4	1/4	2 3/4
85427M	1/2	1	1/2	2 1/2
85242M	1/2	1 1/2	1/2	3
85251M	1/2	2	2 3/4	4
48-183	1/2	2 1/2	1/2	4 1/2